Labnet BioFree™ Pipet Tips
Designed to fit a wide variety of single- and multi-channel pipettors
Choose Products and Accessories below
Product SKU's
SKU | Name | Description | Get a Quote |
---|---|---|---|
P1000-10 | BioFree™ Pipet Tips, 0.5-10 µL, bulk pack, 1,000 tips/unit, 20 units/case | ||
P1000-10X | BioFree™ Pipet Tips, 0.5-10 µL, extended length, 1,000 tips/unit, 20 units/case | ||
P1000-200 | BioFree™ Pipet Tips, 200 µL bulk pack, 1,000 tips/unit, 20 units/case | ||
P1000-200-R | BioFree™ Pipet Tips, 200 µL, 96 tips/rack, 10 racks/unit, 5 units/case | ||
P1000-300 | BioFree™ Pipet Tips, 300 µL, bulk pack, 1,000 tips/unit, 10 units/case | ||
P1000-1000 | BioFree™ Pipet Tips, 1,000 µL, bulk pack, 1,000 tips/unit, 5 units/case | ||
P1000-1000-R | BioFree™ Pipet Tips, 1,000 µL,100 tips/rack, 10 racks/unit, 5 units/case | ||
K943 | BioFree™ Pipet Tips, 10,000 µL, bulk pack, 100 tips/case |
Pipet Tips for Single- and Multi-channel Pipettors
Labnet BioFree™ Pipet Tips are designed to fit a wide variety of single- and multi-channel pipettors. Flexible walls and a series of internal sealing rings ensure a secure fit and minimal forces to eject pipet tips.
- Crystal clear, high quality polypropylene
- Exceptional accuracy and precision
- Univeral fit
- RNase, DNase and Pyrogen safe
- Perfect for Labnet pipettors
High Quality, FDA Compliant Pipet Tips
Labnet BioFree™ Pipet Tips are manufactured from high quality, FDA compliant polypropylene in a clean room environment. Diamond polished, stainless steel molds produce a tip with exceptionally smooth surfaces and extreme accuracy. During the manufacturing process, each lot of tips is tested for accuracy and precision. Tips are also carefully inspected for uniformity and manufacturing irregularities. Certified RNase, DNase, and Pyrogen safe.
Autoclaving Guidelines
To ensure successful steam sterilization of your pipet tips, please adhere to the following guidelines:
- Autoclave all pipet tips at 121°C for 15 minutes, 15 psi/1 atm
- Do not use a dry cycle, as this may cause deformation or weakening of the plastic
- Allow temperature within the autoclave to return to at least 80°C before removing the product
Excessive exposure to autoclaving heat may cause warping or decreased structural integrity. Do not exceed autoclaving recommendations.
Have Questions?
Contact Us